USER MANUAL – Z-GPRS2 / Z-LOGGER
71
28.
SERVER FUNCTION VIA ETHERNET PORT
A server service can be enabled via Ethernet port between:
Web server
FTP server
Modbus TCP-IP server
28.1.
LOCAL CONNECTION TO THE ETHERNET
PORT
To connect a peripheral via Ethernet to Z-GPRS2 or Z-Logger, both must have a compatible IP address.
If the connection is made on web server and the browser uses a proxy server, it is best to disable-it:
For example, if the Z-GPRS2 / Z-Logger IP address is 192.168.90.101 with subnet mask 255.255.255.0 the
other peripheral must have an IP address that starts with 192.168.90, thus, for example, 92.168.90.102 is
correct.
The installed Ethernet supports auto-switching mode. Two peripherals can be connected point-to-point
without the need of a router or Ethernet switch.
28.2.
Server service via Ethernet port: Web server
The web server service can be enabled via Ethernet port (not available via GPRS). Access to web
pages can be protected by setting a user name and password.
The following can be viewed via web server in real time:
-the value of digital inputs
Summary of Contents for Z-GPRS2
Page 8: ...MANUALE UTENTE Z GPRS2 Z LOGGER 8...
Page 72: ...MANUALE UTENTE Z GPRS2 Z LOGGER 72...
Page 165: ...USER MANUAL Z GPRS2 Z LOGGER 73...
