USER MANUAL – Z-GPRS2 / Z-LOGGER
48
EMAIL DIN1 sends an email with the value of the
digital input 1
EMAIL DIN2 sends an email with the value of the
digital input 2
EMAIL DIN3 sends an email with the value of the
digital input 3
EMAIL DIN4 sends an email with the value of the
digital input 4
EMAIL TEMP sends an email with the internal
temperature sensor value
EMAIL SYSLOG
Sends the command log file on microSD via email
(first administrator address in the address book)
FTP SYSLOG
Sends the command log file in the microSD via FTP
If the command is not recognised by Z-GPRS2, an error SMS will be sent:
“COMMAND NOT RECOGNIZED”
You can set MyALARM2 to send a confirmation SMS or ring when the command is successfully
completed.
NOTE
When a command is successfully completed, a ring can only be generate when a voice SIM is
used (data SIM do not permit voice call service).
15.3.
"FAST" SMS COMMANDS (Z-GPRS2 ONLY)
Up to 16 different "fast" commands can be selected from the action list.
Each command is run if the SMS text is "0" or "1" up to "15".
For these commands, the SMS sender number must be enabled (thus it must come from an
operator or administrator).
Summary of Contents for Z-GPRS2
Page 8: ...MANUALE UTENTE Z GPRS2 Z LOGGER 8...
Page 72: ...MANUALE UTENTE Z GPRS2 Z LOGGER 72...
Page 165: ...USER MANUAL Z GPRS2 Z LOGGER 73...
