USER MANUAL – Z-GPRS2 / Z-LOGGER
50
DISABLE ALARM ON DIGITAL INPUT
Disables alarm on digital input 1, 2, 3 or 4
RESET ALARM ON DIGITAL INPUT
Resets alarm on digital input 1, 2, 3 or 4 if set
with manual reset
ENABLE ANALOG ALARM ON
MINIMUM/LOW/HIGH/MAXIMUM
Enables analog 1 or 2 alarm on
minimum/low/high/maximum
RESET ANALOG ALARM ON
MINIMUM/LOW/HIGH/MAXIMUM
Resets analog 1 or 2 alarm on
minimum/low/high/maximum if set with
manual reset
ENABLE ALARM ON TOTALIZER
Enables totalizer 1 or 2 or 3 or 4 alarm (scaled if
necessary)
DISABLE ALARM ON TOTALIZER
Disables totalizer 1 or 2 or 3 or 4 alarm (scaled
if necessary)
ENABLE ALARM ON COUNTER
Enables counter 1 or 2 or 3 or 4 alarm (scaled if
necessary)
DISABLE ALARM ON COUNTER
Disables counter 1 or 2 or 3 or 4 alarm (scaled if
necessary)
ENABLE ALARM ON HOUR METER
Enables alarm on hour meter 1 or 2 or 3 or 4
DISABLE ALARM ON HOUR METER
Disables alarm on hour meter 1 or 2 or 3 or 4
ENABLE ALARM ON COUNTER/LOSS INCREASE
Enables alarm on counter increase or plumbing
leak (if plumbing leak control application is
enabled)
DISABLE ALARM ON COUNTER/LOSS INCREASE
Disables alarm on counter increase or plumbing
leak (if plumbing leak control application is
enabled)
ENABLE ALARM ON STRING STREAM CONTROL
Enables alarm on string stream control
DISABLE ALARM ON STRING STREAM CONTROL
Disables alarm on string stream control
For a full list of possible FAST commands, see Easy Setup/ Easy Z-GPRS2 / Easy Z-Logger software.
Summary of Contents for Z-GPRS2
Page 8: ...MANUALE UTENTE Z GPRS2 Z LOGGER 8...
Page 72: ...MANUALE UTENTE Z GPRS2 Z LOGGER 72...
Page 165: ...USER MANUAL Z GPRS2 Z LOGGER 73...
