USER MANUAL – Z-GPRS2 / Z-LOGGER
44
15.
SUPPORTED COMMANDS (Z-GPRS2 ONLY)
15.1.
SET THE TELEPHONE SMS CHARACTER
ALPHABET
Some Smartphones send SMS with UNICODE characters instead of using the GSM alphabet.
Z-GPRS2 only runs SMS commands with GSM alphabet.
In most cases, SMS characters are set to GSM alphabet by default. If Z-GPRS2 does not recognise any SMS
command, check the alphabet used by the phone.
For Android smartphones:
Press the Message icon -> Settings -> Change writing -> GSM alphabet
15.2.
LIST OF SUPPORTED SMS COMMANDS
Z-GPRS2 lets you run commands if the SMS sender number is enabled (thus it must come from an
operator or administrator).
Command list:
SMS COMMANDS FOR DIGITAL INPUTS/COUNTERS/TOTALIZERS
GET DIN
Status from all counters
GET DINn
All nth input counter status
GET DINn.TOT
All nth input totalizers status
GET DINn.CNT
All nth input counters status
RESET DIN
Reset all counters
RESET CNTn
Reset the nth counter
Summary of Contents for Z-GPRS2
Page 8: ...MANUALE UTENTE Z GPRS2 Z LOGGER 8...
Page 72: ...MANUALE UTENTE Z GPRS2 Z LOGGER 72...
Page 165: ...USER MANUAL Z GPRS2 Z LOGGER 73...
