One BOLT goes into each Tabletop. The block is trapped between the legs. Carefully turn the structure over and repeat to Fully
Join the two parts of the Tabletop. You might want to complete Step 2 before turning the Table Over and installing the second
Joining Block.
STEP 1:
STEP 2:
We recommend BOLTING the END PLATES together to add additional strength to the join between two Tabletops. Manipulate
the END plates so you can locate a Bolt through one side and into a T Nut in the opposing plate. Tighten by finger to catch the
thread (and avoid cross threading) before using a Hex key to tighten the bolts. This give a super strong join between Tabletops.
You may find it easier to loosen the bolts on the joining plates OR attach one of the joining plates THEN connect the END plates
– then Tighten the joining plate bolts – THEN install the second plate!
BOLTING TWO TABLETOP END PLATES TOGETHER
The process is the
SAME
for Joining 2 x 1200 Tabletops. Below you will find EXAMPLE images of 2 x 600 and 2 x 1200 Tabletops
bolted together!