semaphore TBOX LT2-530 Series, User Manual, Page: 97 / 197

Version : 1.09 97
10.8. Virtual Server
To access Virtual Server configuration, you have to activate “RTU properties” -> “Protection”
-> “Enable Advanced IP Configuration” (see chapter 17.1.5) and “RTU properties” ->
“Advanced” -> “TCP/IP”, check Virtual Server (see chapter 7.6.6)
Virtual Server Parameters allow defining specific routes (in <--> out) based on IP protocol and TCP port
Virtual Server Parameters example:
Accessing a Camera with IP address 192.168.1.100 connected to Ethernet, through a 3G connection using
TCP port=81
Any request arriving with TCP port =81 will be redirected to IP address 192.168.1.100.
Example: http://78.25.56.126:81/jpg/image.jpg
Incoming Protocol:
The incoming protocol that has to be routed.
Incoming Port:
The incoming IP Port that has to be routed.
Destination IP address: The IP address to which data coming with above settings has to be routed.
Destination Port:
The IP port used for data sent to the destination IP address.
Activate:
Allows activating/deactivating a Virtual Server rule.