semaphore TBOX LT2-530 Series, User Manual, Page: 130 / 197

Version : 1.09 130
13.6. Get Message in Text Tag
This feature allows receiving the complete message (SMS or POP3) into a TEXT Tag. At the exception of
the caller ID, which is available is a dedicated Communication Variable.
The message will then be parsed using BASIC functions.
When this feature is active, ReadSMS/POP3 pre-defined message feature (see chapter
13.3.1) is not available anymore. OS is not parsing message anymore as it is done in the
application.
Tag Text:
It will contain the date, time and the message. Make sure you define this text Tag with
a minimum of 160 characters.
Example:
11/03/25,10:29:14+04 Hello to TBox!
- The date and time are the one given by the SMS-C (not from TBox, not from sender)
- The +04 indicates the differences to GMT in quarters of an hour.
Tag Stack:
This is a digital Tag. When changing to 1, it indicates message(s) is(are) on the stack. By
writing "0", you bring up a message from the stack to the Text Tag (see above). When it
switches back to "1", it means there is at least one more message in the stack.
MS-CPU32, -LT2: stack of 50 messages. Circular buffer.
MS-CPU16, -LITE, -WM, -LP: no stack. Message with a maximum length of 89 characters.