semaphore TBOX LT2-530 Series, User Manual, Page: 37 / 197

Version : 1.09 37
Test of memory
Detail on memory “used” and “free” is also available during compilation.
See details chapter 20.1: Technical Specifications.
5.9.3. Sending an application
In order to have
TB
OX
LT2
running with the program you have developed with TWinSoft, you have to send
it. You can use any media to achieve it (RS232, modem, Ethernet, …).
Possibilities for sending a program:
Use the icon of the main tool bar
From the main menu use: ‘Communication’

‘Send program’
Use the accelerator keys <CTRL + F9>
The sequence for sending is Com Sending.
If a problem occurs during compilation, the sequence is stopped and the “Results” window pops-up (see
above)
TB
OX
LT2
keeps running during sending. At the end of sending, there is a
de-installation/re-installation controlled by TWinSoft. In case communication is lost
during this period,
TB
OX
LT2
will still be available with its IP address of the application.
DO NOT RESET TBOX DURING INSTALLATION AND START PROCEDURE