semaphore TBOX LT2-530 Series, User Manual, Page: 28 / 197

Version : 1.09 28
5.2. Communicating with TB
OX
LT2
Once you have opened a document, either created a new one with the Wizard or opened an existing one,
you can establish the connection with your
TB
OX
LT2
.
The possible communications are serial, Ethernet, USB or modem, according to the media used to connect
to
TB
OX
LT2
. See details in chapter 8.2. RTU Communication Ports.

Serial: check the Baudrate you have given to the serial port in your application
(by default 9600, N).

Ethernet: check the IP address you have given to your
TB
OX
LT2
and that it is in the same subnet of
the PC or accessible to the PC.

USB: Communication happens in TCP/IP.
TB
OX
LT2
acts as a DHCP server and provides to the PC
an IP in the range 10.8.10.xxx.
TB
OX
LT2
itself uses the IP address 10.8.10.1.

Modem: check the tel. Number of
TB
OX
LT2
.
5.3. PC Communication Set up
To communicate with the
TB
OX
LT2
, you need to select a communication media on the PC.
From the main menu of TWinSoft:

Communication

PC Setup:
Example:
Communication through Ethernet