semaphore TBOX LT2-530 Series, User Manual, Page: 110 / 197

Version : 1.09 110
12.2. Digital Alarm Condition
Tagname: The Tag selected to generate the alarm.
Type: The edge on which the alarm is going to be started (rising, falling or both).
Message or Report: text or file associated to the alarm.
Depending on the type of recipient associated, you can send a message or a report. It
can be a message sent to a GSM, a message or report sent as e-mail, to a printer or the
file sent by FTP …
It always appears in the table of alarms, to distinguish them (see chapter 12.8).
If the alarm condition sends an e-mail, it can be of 2 kinds:
Message: a text message is sent and it appears in the ‘object’ field of the e-mail
Report: sending of a report created with Report Studio. The report must be created from
the Project Workspace and the list of ‘Web & Report files’.
Recipient: Select a Recipient or a group of recipients. The ‘person’ you wish to contact in case of
alarm (see ‘Recipients’ below).
In case you select a ‘group of Recipients’ see next.
Call all Recipients: can be used when selecting a Group of Recipients.
When the option is cleared:
TB
OX
LT2
calls the first one in the group. In case the alarm
cannot be acknowledged after the number of tries,
TB
OX
LT2
automatically calls
the next recipient in the group and so on until it succeeds. Then it stops. (Also
known as ‘Chain’)
When the option is checked:
TB
OX
LT2
sends the alarm to all recipients of the group.
(Also known as ‘Link’)