Selco Genesis 2200 PMC, Repair Manual

Page: 17 / 54

53
Confirm the operation by pressing button (1) .
Cancel the operation by pressing button (2) .
3.9 Interface personalisation
Allows the parameters to be customized on the main menu.
500 Allows the selection of the required graphic interface:
XE (Easy Mode)
XA (Advanced Mode)
XP (Professional Mode)
PARAMETER
( )
( )
( )
XE
XA
XP
PROCESS
MMA
TIG DC
LIFT START
MIG/MAG
Pulsed MIG
MMA
TIG DC
LIFT START
MIG/MAG
Pulsed MIG
MMA
TIG DC
LIFT START
MIG/MAG
Pulsed MIG
1 7 segment display personalisation
Enter set-up by pressing the encoder button for at least
5 seconds.
Select the required parameter by rotating the encoder.
Store the selected parameter in the 7 segment display
by pressing button (2) .
Save and exit the current screen by pressing button (4)
.
Default I1
3.10 Lock/unlock
Allows all the settings to be locked from the control panel with
a security password.
Enter set-up by pressing the encoder key for at least 5 seconds.
Select the required parameter (551).
Activate the regulation of the selected parameter by pressing the
encoder button.
Set a numerical code (password) by rotating the encoder.
Confirm the change made by pressing the encoder button.
Save and exit the current screen by pressing button (4) .
The carrying out of any operation on a locked control panel
causes a special screen to appear.