64
•
Static electricity. Touching the CRT surface can sometimes cause static electricity.
This is because the CRT surface is subject to static and will not adversely affect the
human body.
•
Installation and removal.. Ensure that the Degause Coil, Fly Back Transformer,
Anode Lead and Focus leads are not positioned close to sheet metalwork sharp
edges. This is to avoid damaging the insulation and not to cause electric shock and
or malfunction.
•
For the purpose of static
prevention, special coating
is applied to the CRT face of
this product. Damage to the
coated film can cause
electric shock to the
engineers of maintenance
persons. Take heed when
cleaning.
•
DO NOT apply or rub with
hard or abrasive material
any components directly
onto the CRT surface.
•
Avoid applying stickers,
seals on the surface of the
CRT.
•
DO NOT remove aluminium
foils from the CRT corners.
Removing these foils can
remove any static electric
prevention.
17.2. CAUTIONS TO BE AWARE OF WHEN CLEANING THE CRT SURFACES
•
Static prevention coating is applied to the CRT surface. When cleaning, pay attention
to the following points. Peeling off the preventative coat can cause electric shock.
•
Remove smears, smudges by using a soft cloth. Do NOT use a coarse gauze or
similar product.
•
When using a chemically based detergent, be sure to follow instructions below:
o
Dilute chemical detergent with water and dip an area of the cloth into it.
Squeeze cloth of all excess water. Wipe screen thoroughly to remove greasy
smears or smudges.
o
Do not use a chemical cleaning compound, any abrasive cleaning agent or
bleach like products.
o
Do not use alkaline chemical detergents such as “glass cleaner” and avoid all
solvents and thinners.
•
Do not rub or scratch the CRT surface with hard items such as a brush or finger nails
etc.
Clean the CRT surface once every 3 months or when the screen looks dirty.
Summary of Contents for FORD RACING TWIN-FULL BLOWN
