Sega FORD RACING TWIN-FULL BLOWN, Service Manual

Page: 68 / 111

63
17. MONITOR
17.1. CAUTIONS CONCERNING THE SAFETY ISSUES WHEN HANDLING THE
MONITOR.
Before handling the monitor(s), be sure to read the following explanations and comply with the
caution/warning instructions given below. Note that the caution/warning symbol marks and letters are used
in the instructions.
•
When performing such work as installing and removing the monitor, inserting and
disconnecting the external connectors to and from the monitor interior and the
monitor, be sure to disconnect the power connector (plug) before starting work.
Preceding the work without following this instruction can cause electric shock or
malfunction.
•
Using the monitor by converting it without obtaining prior permission is not allowed.
SEGA shall not be liable for any malfunctioning or accident caused by unauthorised
work being carried out.
•
Primary side and Secondary side. The monitor’s circuit which is divided into the
Primary side and Secondary side are electrically isolated. Do not touch the primary
side, or do not touch both the primary side and the secondary side simultaneously.
Failing to observe the instruction can cause electric shock and this is very dangerous.
When making monitor adjustments do not touch ant part of the monitor assembly,
this can cause malfunction and or an electric shock. Also, be sure as to not cause a
short circuit condition between the primary and secondary side of the assembly. This
can be very dangerous and may cause electric shock hazard.
•
UHT. Ultra High Tension. Some of the parts contained on / in the monitor assembly
are subject to UHT. UHT voltage can be in excess of 25,000 volts and is very
dangerous. Therefore, do not touch the monitor interior. Should solder or any other
debris come into contact with the internal components of the monitor, turn the power
OFF so as not to cause a malfunction or fire hazard.