Sega FORD RACING TWIN-FULL BLOWN, Service Manual

Page: 17 / 111

12
7. ASSEMBLING WITH PRECAUTIONS
•
Perform assembly work by following the procedure herein stated. Failing to comply
with the instructions can cause electric shock.
•
Assembling should be performed as stated in this manual. Since this is a complex
machine, erroneous assembling can cause electric shock, machine damage and or
impair functionality.
•
When assembling, be sure to be accompanied by another person. Depending on the
work involved – there are some cases where two people are required. If only one
person carries out the work alone, then it is possible that injury may occur, or
damage to the product.
•
Ensure that all connectors are accurately connected. Incomplete connections may
cause electric shock or fire hazard.
When carrying out the assembly work, follow the procedure as laid out in this manual. Do not skip any
stages as injury may occur if the machine in not installed in the correct sequence.
1. Assembling 1 and 2 player cockpit.
2. Securing the machine into location.
3. Installing the Pop panel.
4. Installing Power Cables.
5. Turning power ON.
6. Assembly check.
When assembling, make sure that tools such as a Phillips type screwdriver, wrench (for M16 hex) and a
socket wrench to suit M8 (13mm) are available.