65
17.3. ADJUSTING THE PICTURE
•
Monitor adjustments have been made at the time of shipment. Therefore, do not
make further adjustments without a justifiable reason. Adjusting the monitor which
contains high tension parts is a dangerous task. Also, an erroneous adjustment can
cause deviated synchronization and image fault, resulting in malfunction.
•
When making adjustments to the picture, take care when handling the remote
controller board.
To make monitor adjustments, remove the 2 Truss Head screws from the CRT Adjustment panel. Remove
the panel and the Remote Controller board. Do not pull on the CRT adjustment panel as the wires
connecting the Remote Controller board to the Monitor board can become disconnected if pulled too hard.
MONITOR CONTROL BOARD
OPERATING THE MONITOR CONTROL BOARD
1. Press the “Function” button to display the MENU screen.
Monitor Control Menu as displayed on screen
2. To adjust the “brightness” use the “UP DOWN” button to move the flashing curser to the
BRIGHTNESS symbol.
3. To select the option, press the “FUNCTION” to engage the operation.
4. The selected icon will flash and by using the “UP DOWN” buttons the value of the set criteria can
be changed to the required value.
5. Once the required value is set, press the “DEGAUSE” button to exit back to the main menu.
6. Repeat the process to adjust different options.
PLEASE REFER TO THE MONITOR MANUAL FOR COMPLETE OPERATING INSTRUCTIONS
Summary of Contents for FORD RACING TWIN-FULL BLOWN
