ExP[1] . Trigger Signal
[Protection Para / ExP[1]]
If: Device Variant/Inputs = Without Inputs
• “-”
•
If: Device Variant/Inputs = Without Inputs
• “-”
•
If: Device Variant/Inputs = Ext. Trip
• Prot . DI 2
•
If: Device Variant/Inputs = Ext. Trip, Ext. Reset
• Prot . DI 2
•
If: Device Variant/Inputs = Configurable
• “-”, Prot . DI 1, Prot . DI 2
•
If: Device Variant/Inputs = Configurable Inputs
• “-”, Prot . DI 1, Prot . DI 2
•
P.1
Assign the trigger signal that will make the »ExP« module start (pickup).
ExP[1] . ExBlo
[Protection Para / ExP[1]]
“-”
“-” . . . Prot . Pos OFF
P.1
External blocking of the module if the state of the assigned signal is true.
7.17.3
ExP[1]: Input States
ExP[1] . ExBlo-I
[Operation / Status Display / ExP[1]]
Module input state: External blocking
ExP[1] . Trigger Signal-I
[Operation / Status Display / ExP[1]]
State of the module input: External trigger signal
7.17.4
ExP[1]: Signals (Output States)
ExP[1] . Active
[Operation / Status Display / All Actives]
[Operation / Status Display / ExP[1]]
Signal: active
69
WIC1
WIC1-1.0-EN-REF
7 Protection Parameter
7.17.3 ExP[1]: Input States
