• commissioning engineers,
•
• people dealing with setting, testing and maintenance of protection and control
•
devices,
• as well as trained personnel for electrical installations and power stations.
•
All functions concerning the WIC1 are listed. Should there be a description of any functions,
parameters or inputs/outputs which do not apply to the device in use, please ignore
that information.
This manual describes the (optionally) full featured versions of the devices.
All technical information and data included in this manual reflect their state at the time this
document was issued. We reserve the right to carry out technical modifications in line with
further development without changing this manual and without previous notice. Hence no
claim can be brought based on the information and descriptions this manual includes.
We do not accept any liability for damage and operational failures caused by operating
errors or disregarding the directions of this manual.
No part of this manual is allowed to be reproduced or passed on to others in any form, unless
SEG have approved in writing.
This Reference Manual is part of the delivery scope when purchasing the device. In case the
device is passed on (sold) to a third party, the manual has to be handed over as well.
Information Concerning Liability and Warranty
SEG does not accept any liability for damage resulting from conversions or changes carried
out on the device or planning (projecting) work, parameter setting or adjustment changes
done by the customer.
The warranty expires after a device has been opened by others than SEG specialists.
Warranty and liability conditions stated in SEG General Terms and Conditions are not
supplemented by the above-mentioned explanations.
9
WIC1
WIC1-1.0-EN-REF
1 About This Reference Manual
