SecurityMan ClockCam-WiFi User Manual Download Page 128

Page: 128 / 154

124

of any configuration options or settings. The reboot option is used simply to reboot

your IP camera. To reboot the IP camera, click on the reboot menu and then click

on OK to reboot.

NOTE:

Rebooting is not required, however, if the IP camera becomes erratic or not

responsive, please use this option to reboot the camera as shown below.

• • • •UPGRADE

The UPGRADE sub-menu located in the “Advanced” menu allows you to manually

perform firmware and software upgrades when needed. To upgrade the firmware

of the IP camera, simply click on the “Upgrade” button and then browse for the

update file (.bin), open it and then click on the “Upgrade” button to start upgrading

as shown below.

NOTE:

upgrades should only be performed if you are told to do so by a trained

technician at SecurityMan.

Summary of Contents for ClockCam-WiFi



























































































































































Search results

Summary of Contents for ClockCam-WiFi

Reviews:

Related manuals for ClockCam-WiFi

Brands by name

Popular brands

SecurityMan ClockCam-WiFi, User Manual

Search results

Summary of Contents for ClockCam-WiFi

Reviews:

Related manuals for ClockCam-WiFi

Brands by name

Popular brands