SecurityMan ClockCam-WiFi, User Manual, Page: 147 / 154

143
Fig3.4 Fig3.5
3. Once your Wi-Fi name has been selected, type in the password associated
with your Wi-Fi network (fig. 3.6). If the password space is already filled, delete
anything in the space and type in your password. Now tap back-arrow on your
phone to hide the key pad and tap on
“Save”
located on the bottom left hand
corner of the screen (fig. 3.7). At this point you should get a “Successfully
Changed” message and sent back to the previous screen (fig. 3.8).
NOTE: Password is case sensitive. If the password is incorrect, the message will
still show “Saved Successful”.
Fig3.6 Fig3.7 Fig3.8
4. Go back to the live view screen. Unplug the Ethernet cable from the back of
the ClockCam-WiFi. Wait 30-45 seconds for the Wi-Fi access. Wi-Fi setup
complete.
NOTE: Your camera screen will freeze once the Ethernet cable is unplugged. If the
Wi-Fi password is incorrect, the camera screen will show “Failed to connect”.