manualshive.com logo in svg

Security Command 670, User Manual, Page: 29 / 32

Share
Download
Security Command 670 User Manual Download Page 29

   

27

                  TIME

5. Press

to reset the time of day, then go to step 6.

                  DAY
Press

to reset the day of week, then go to step 7.

                 DATE
Press

to reset the date and year, then go to step 8.

6. If TIME is pressed in step 5, the display will read     - :                    AM  PM

  - :                    AM  PM

  - :                    AM  PM

  - :                    AM  PM

  - :                    AM  PM

                        AM                           PM

Enter the new time and then press the                         or
key.  (Note: a zero must be entered for the
tens digit of the hour if the hour is less than 10.)
After time is entered the display will return to step 5.

7. If DAY is pressed in step 5, the display will read:

  SUN MON TUE WED    

  SUN MON TUE WED    

  SUN MON TUE WED    

  SUN MON TUE WED    

  SUN MON TUE WED      then   THU  FRI  SAT

THU  FRI  SAT

THU  FRI  SAT

THU  FRI  SAT

THU  FRI  SAT

Press the

       key below the desired day when it is displayed.

The display will return to step 5.

8. If DATE is pressed in step 5, the display will read:

      MONTH:-

 MONTH:-

 MONTH:-

 MONTH:-

 MONTH:-

Enter up to two digits for the month, then

  DAY:-

  DAY:-

  DAY:-

  DAY:-

  DAY:-

Enter up to two digits for the day, then

  YEAR:-

  YEAR:-

  YEAR:-

  YEAR:-

  YEAR:-

Enter up to two digits for the year.

The display will return to the time of day display.

  TIME

User Code Level:

User Code Level:

User Code Level:

User Code Level:

User Code Level:

None for time display
8 to reset time

Function:

Function:

Function:

Function:

Function: Displays day, time  and date.

Time is used to display the current day of the week, the time of day and date of year.
The day, time or date  can also be reset.  When time is selected the day of week
and time of day are displayed, followed by the date and year.  If no changes are to
be made do nothing and the display will clear automatically.  If the day , time or date
is to be changed press COMMAND while the date is being displayed. You will be
asked to enter your code number. When the code number is accepted you can
choose which of the three you wish to change and enter the new information.

Step By Step:

Step By Step:

Step By Step:

Step By Step:

Step By Step:

1. Press

  until     TIME?                       

    TIME?                       

    TIME?                       

    TIME?                       

    TIME?                                 is displayed.

2. When    TIME?                         

   TIME?                         

   TIME?                         

   TIME?                         

   TIME?                            

   

   

   

     is displayed press any one of the top

four select  keys.   The display will show the current day and time.
Press

    and the current date will be displayed.

3. To reset the day, time or date  press

                      while the current

date is being displayed. The display will read     ENTER CODE: -

  ENTER CODE: -

  ENTER CODE: -

  ENTER CODE: -

  ENTER CODE: -      

      

      

      

              .

4. Enter your code number and press

.  The display will  read

 TIME  DAY  DATE            

 TIME  DAY  DATE            

 TIME  DAY  DATE            

 TIME  DAY  DATE            

 TIME  DAY  DATE            .

.

COMMAND

COMMAND

COMMAND

COMMAND

Summary of Contents for 670

































Reviews:

No comments