25
Once you have selected Permanent or Temporary Schedules you will be asked
which area and day you wish to schedule. The SECURITY COMMAND
SECURITY COMMAND
SECURITY COMMAND
SECURITY COMMAND
SECURITY COMMAND will show
you the current schedule for that day. It can be deleted and the new opening and
closing times may be entered. You should list your permanent schedule on the next
page for easy reference.
Step By Step:
Step By Step:
Step By Step:
Step By Step:
Step By Step:
1. Press the
key until SCHEDULES?
SCHEDULES?
SCHEDULES?
SCHEDULES?
SCHEDULES? is displayed.
2. When SCHEDULES?
SCHEDULES?
SCHEDULES?
SCHEDULES?
SCHEDULES? is displayed press any one of the top four
select keys. The display will read ENTER CODE: -
ENTER CODE: -
ENTER CODE: -
ENTER CODE: -
ENTER CODE: - .
3. Enter your code number and press
. The display will read
PRM TMP
PRM TMP
PRM TMP
PRM TMP
PRM TMP .
4. Press
to enter permanent schedules, then go to step 5.
Press
to enter temporary schedules, then go to step 5.
* The use of a separate schedule for each area is optional and is programmed
during system installation.
SCHEDULES
User Code Level:
User Code Level:
User Code Level:
User Code Level:
User Code Level: 7
Function:
Function:
Function:
Function:
Function: To enter and delete Permanent and Temporary Schedules
Schedules is used to enter permanent and temporary opening and closing times
for your burglary system. When Schedules is selected you will be asked to enter
your code number. When the code number is accepted you will be asked if you want
to enter Permanent or Temporary Schedules.
Permanent Schedules and Temporary Schedules provide opening and closing
times for your burglary system. One Permanent and one Temporary opening and
closing schedule is available for each area for each day of the week.* A Temporary
schedule is erased from memory automatically each day, but permanent sched-
ules remain in memory until a new schedule is entered. Level one and two User
Codes will function only during a scheduled period, also your alarm system can be
programmed to not require a code number for disarming during a scheduled
period. This reduces the need for each employee to have their own code number.
This is optional and is programmed during system installation.
Your system may be programmed to automatically arm and disarm at the perma-
nent and temporary opening and closing times. The option is selected during
sytsem installation.
Permanent and Temporary Schedules are also used for Closing Check. This is an
option which checks to see that the burglary alarm is armed by the closing time each
day. Closing Check is further described in the Closing Check section of the users
manual.
PRM
TMP
COMMAND
COMMAND