Security Command 670, User Manual, Page: 11 / 32

9
Disarming: Disarming: Disarming: Disarming: Disarming: You should enter the premises through an entry/exit delay door. By
doing this the SECURITY COMMAND
SECURITY COMMAND SECURITY COMMAND SECURITY COMMAND SECURITY COMMAND prewarn tone will pulse to remind you to
disarm. Entering a delay door prior to disarming is not required. When disarming
is selected a code number may be required. This is optional. A code number may
not be required within permanent or temporary schedules, or the system may be
programmed to always require a code regardless of time. If a code is required you
should note that level 2 User Codes only function during permanent or temporary
schedules. If a code number is required you will only be allowed to control the areas
which are assigned to your code number.
All Or Selective Disarming: All Or Selective Disarming: All Or Selective Disarming: All Or Selective Disarming: All Or Selective Disarming: After entering your code number you will be asked
if you wish to disarm all of the areas to which you have access or only a selected
area. If you choose to disarm all areas the system will disarm them all. If you choose
to disarm a selective area the SECURITY COMMAND
SECURITY COMMAND
SECURITY COMMAND SECURITY COMMAND
SECURITY COMMAND will allow you to choose the
individual area you want to disarm.
Alarm Display: Alarm Display: Alarm Display: Alarm Display: Alarm Display: After selecting your areas the SECURITY COMMAND SECURITY COMMAND SECURITY COMMAND SECURITY COMMAND SECURITY COMMAND will display
any loops which tripped in the areas you are disarming or any transmission
problems which occurred during the armed period. All burglary loops in the areas
you selected are then disarmed and any bypassed loops are automatically reset.
Disarmed Message: Disarmed Message: Disarmed Message: Disarmed Message: Disarmed Message: After disarming, the SECURITY COMMAND SECURITY COMMAND SECURITY COMMAND SECURITY COMMAND SECURITY COMMAND will display
“ALL SYSTEM OFF” if all areas are now disarmed.
Central Station Report: Central Station Report: Central Station Report: Central Station Report: Central Station Report: A report of the system disarming can be transmitted to
your Central Station. This is optional and is programmed at the time of system
installation.
Step By Step: Step By Step: Step By Step: Step By Step: Step By Step:
1. Press the key until ARM DISARM ARM DISARM ARM DISARM ARM DISARM ARM DISARM is displayed.
(Note: during entry delay the display immediately jumps to step 3.)
DISARM
2. Press
to disarm areas.
3. Enter your code number if required. The display will read
ALL NO ALL NO ALL NO ALL NO ALL NO YES YES YES YES YES .
NO
4. Press
to disarm selective areas. Go to step 5.
YES
Press
to disarm all areas to which you have access.
Go to step 6.
5. If NO is selected in step 4 the display will list each area to which you have
access, followed by NO and YES. Example: OFFICE NO YES OFFICE NO YES
OFFICE NO YES OFFICE NO YES
OFFICE NO YES .
YES
5a. Press
for every area you wish to disarm.
NO
5b. Press
for every area you do not wish to disarm.
6. Any loops which tripped or any communication problems which occurred
during the armed period are automatically displayed.
7. The display will read ALL SYSTEM OFF ALL SYSTEM OFF ALL SYSTEM OFF ALL SYSTEM OFF ALL SYSTEM OFF if all areas in the system are
now disarmed.
AREA SYSTEM DISARMING
COMMAND