Security Command 670 User Manual Download Page 20 | Manualshive

Page: 20 / 32

Security Command 670 User Manual Download Page 20

18

LOOP MONITOR

User Code Level: 4

Function:

Function:

Function:

Function:

Function: Monitor selected disarmed loops and display their name when tripped.

Loop Monitor will monitor any disarmed loop and will display the loop name and
sound the keypad monitor tone when the loop trips. The loop will be displayed at
all SECURITY COMMAND

SECURITY COMMAND

SECURITY COMMAND

SECURITY COMMAND

SECURITY COMMANDs in the system. Any combination of disarmed loops

may be placed in Loop Monitor. If more than one loop is in Loop Monitor the last
loop that tripped will be displayed. When the loop is armed the name is cleared.

Loop Monitor display will alternate with Armed Display and Status List. Armed
Display and Status List are optional. The options are selected at the time the
system is programmed.

Step By Step:

Step By Step:

Step By Step:

Step By Step:

Step By Step:

1. Press the

key until LOOP MONITOR?

LOOP MONITOR?

LOOP MONITOR?

LOOP MONITOR?

LOOP MONITOR? is displayed.

2. When LOOP MONITOR?

LOOP MONITOR?

LOOP MONITOR?

LOOP MONITOR?

LOOP MONITOR? is displayed press any one of the top four

select keys. The display will read ENTER CODE: -

ENTER CODE: -

ENTER CODE: -

ENTER CODE: -

ENTER CODE: - .

3. Enter your code number and press

. The display will read:

PERIM ALL NBR

PERIM ALL NBR

PERIM ALL NBR

PERIM ALL NBR

PERIM ALL NBR .

PERIM
4. Press

to place all disarmed perimeter loops into loop monitor.
(PERIM is displayed on all/perimeter systems only.)

ALL

Press

to place all disarmed loops into loop monitor.

NBR
Press

to enter a specific loop number for loop monitor.

5. If ALL or PERIM is selected the display will ask if the loops are to be added

or removed from loop monitor.

6. If NBR is selected the display will read LOOP : - ADD RMV

LOOP : - ADD RMV

LOOP : - ADD RMV

LOOP : - ADD RMV

LOOP : - ADD RMV .

ADD

6a. Enter the desired loop number and press

to add to, or

RMV

7. The loop number will automatically disappear and a new loop number may be

entered in step 6. A loop is automatically removed from Loop Monitor when it
is armed. The loop can be returned to the Monitor mode automatically, when
disarmed, or it may be required to manually reenter the loop number each
arming cycle. This option is selected at the time the system is programmed.

to remove from Loop Monitor.

COMMAND

COMMAND

«
...
18
19
20
21
22
...
»

Summary of Contents for 670

































Reviews:

No comments