manualshive.com logo in svg

Security Command 670, User Manual, Page: 14 / 32

Share
Download
Security Command 670 User Manual Download Page 14

 12

To disarm your burglary system you should enter the premises through an entry/
exit delay door. By doing this the SECURITY COMMAND prewarn tone will pulse
to remind you to disarm. Entering a delay door prior to disarming is not required
however, you can simply press COMMAND until DISARM? is displayed and
proceed from that point.

Code number:

Code number:

Code number:

Code number:

Code number:   A code number may be required when disarming. If this is a
residential system a code number  is normally required to disarm. If this is a
commercial system a code number may not be required within permanent or
temporary scheduled opening times. This is optional. The system may be pro-
grammed to always require a code regardless of time. If this is the case you should
note that level 2 User Codes only function during temporary or permanent
scheduled opening times. The disarming code options are programmed during
system installation.

Alarm Display:

Alarm Display:

Alarm Display:

Alarm Display:

Alarm Display:   After entering a code number, if required, the SECURITY
COMMAND will display any loops which tripped or any transmission problems
which occurred during the armed period. All burglary loops are then disarmed and
any bypassed loops are automatically reset.

Central Station Report:

Central Station Report:

Central Station Report:

Central Station Report:

Central Station Report:   A report of the system disarming can be transmitted to
your Central Station. This is optional and is programmed at the time of system
installation.

Step By Step:

Step By Step:

Step By Step:

Step By Step:

Step By Step:

1. Press  the

         key until    

    

     DISARM?

 DISARM?

 DISARM?

 DISARM?

 DISARM?                       is displayed.

(Note: during entry delay the display immediately jumps to step 3.)

2. When    DISARM?

DISARM?

DISARM?

DISARM?

DISARM?

is displayed press any one of the top four

select keys.

3. Enter your code number if required. If a code number is not required the

display will read   PRESS COMMAND 

PRESS COMMAND 

PRESS COMMAND 

PRESS COMMAND 

PRESS COMMAND       during entry delay only.

4. Any loops which tripped or any communication problems which occurred

during the armed period are automatically displayed.

5. The display will  read      ALL SYSTEM  OFF

ALL SYSTEM  OFF

ALL SYSTEM  OFF

ALL SYSTEM  OFF

ALL SYSTEM  OFF      to confirm that the system is

disarmed.

ALL/PERIMETER DISARMING

COMMAND

Summary of Contents for 670

































Reviews:

No comments