manualshive.com logo in svg

Security Command 670, User Manual, Page: 17 / 32

Share
Download
Security Command 670 User Manual Download Page 17

   

15

ARMED AREAS

User Code Level:

User Code Level:

User Code Level:

User Code Level:

User Code Level:

None

Function:

Function:

Function:

Function:

Function: Displays all armed areas

Armed Areas is used to display all of the armed areas in your system. Each area
that is armed will be displayed with area number and name.

Step By Step:

Step By Step:

Step By Step:

Step By Step:

Step By Step:

1. Press  the

        key until    ARMED AREAS?        

ARMED AREAS?        

ARMED AREAS?        

ARMED AREAS?        

ARMED AREAS?           is displayed.

2. When   ARMED AREAS?          

ARMED AREAS?          

ARMED AREAS?          

ARMED AREAS?          

ARMED AREAS?          is displayed press any one of the top four

select keys.  The display will list each armed area one at a time.

3. If no areas are armed the display will read              NONE                   

         NONE                   

         NONE                   

         NONE                   

         NONE                   .

COMMAND

Summary of Contents for 670

































Reviews:

No comments