The TV7202 uses MPEG4 Codec compression as the best streaming solution. The size of the compressed video
data is much less than with JPEG. However, this depends on the picture change between two consecutive pictures.
Three parameters are available for this setting.
Restricts the maximum frame rate, which can be combined with
to optimise bandwidth use and video quality. If the user wants to fix bandwidth usage irrespective of the video
quality,
and the desired bandwidth must be selected. If you select the
maximum frame rate within the limited bandwidth, the video quality suffers, particularly if there are bog changes
between pictures.
Select
to mirror the video picture vertically and
horizontally.
Click
to enable the motion sensor. When this option is enabled, the sensor fields
are displayed with a red frame. If this option is disabled, setting made for motion detection has no effect. Motion
detection increases the system load. For an extended configuration, go to the
Motion detection
page
.
To set the best video quality, click
, which opens a window where you can make fine
settings. There are four fine setting options:
,
,
and
. Each field has
11 stages (-5 to +5). To check your fine settings, click
. If you are satisfied with the picture, click
to save your picture parameters.
Click this button to restore the original settings and discard
your changes. If you change parameters without saving them, they are used only until the next system reboot.
24
