background image

 

Preface

 

 
Dear Customer,

 

 
Thank you for purchasing this video server of the DIGILAN series from Security Center. You made the right decision 
in choosing this state-of-the-art technology, 

 

which complies with the current standards of domestic and European regulations. The CE has been proven and all 

related certifications are available from the manufacturer upon request.

 

To maintain this status and to guarantee safe operation, it is your obligation to observe these operating instructions! 
In the event of questions, please contact your local specialist dealer.

 

 
This video server is used for object surveillance. The recorded video signals are transmitted to a computer digitally 

via the connected network. The computer software permits simultaneous recording of up to 16 connected video 
signals. Data storage is subject to local national data-protection guidelines. Via the Internet Explorer, you have 
worldwide access to installed cameras (password-protected).

 

 

Precautions

 

 

The video server and connected components must be kept free of moisture (cellars and similar surroundings are to 
be strictly avoided). Use of this product for other than the described purpose may lead to damage of the product. 
Other hazards such as short-circuiting, fire, electric shock, etc., are also possible. The equipment is designed for 
operation using a Class 2 12V DC transformer. No part of the product may be changed or modified in any way. 
Connection to the public power network is subject to country-specific regulations. Please be aware of applicable 
regulations in advance.

 

 

 

To avoid fire and injury, please observe the 
following:

 

 
Securely fasten the device at a dry location in the 
building.

 

Ensure sufficient air circulation.

 

Do not expose the device to temperatures less than 
0°C or more than 50°C.

 

The device is designed for indoor use only.

 

Humidity must not exceed 90% (non-condensed).

 

Ensure that the voltage is disconnected when 
performing work on the device.

 

 
 
 
 

Please observe the following regulations to ensure 
trouble-free operation of your device.

 

 
The security video server is supplied by a 12V DC 
transformer. The transformer should be connected 
to the 230V AC building mains by means of a 
separate, electrically protected line.

 

Connection work to the building mains is subject 
to country-specific regulations.

 

 
 
 
 

 
 
 

General:

 

 
Improper or careless installation work may lead to faults and poor image quality. Therefore please read the 
instructions very carefully and follow the installation instructions for lines and components precisely.

 

 

2

Summary of Contents for TV7202



























































Reviews: