PTZ camera control (Pan/Tilt/Zoom camera)
A motor-driven PTZ camera first has to be configured in advance. Using the controls on the right of the video, you
can control the motor-driven camera connected with the video server. Open the list of preset positions to select the
camera, and then click
. Only the administrator can preset the camera locations. Users
with camera control privileges can only view the preset locations. With the five buttons on the right of the picture,
the cameras can be controlled with other functions apart from pan, tilt and zoom. These should be preconfigured
by the administrator with the aid of the camera instructions.
If the PTZ camera is installed on the video server, you can click any position on the screen to move the camera to
this position.
Currently, the video server supports Sony EVID30, Canon VCC4 and Pelco-D PTZ
cameras for
this operation.
<url> http://<video server>
<video server> is the hostname or IP address of the video server.
14
