Seat toledo, Owner'S Manual

Page: 51 / 258

INSTRUMENT PANEL –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
2.11
HANDLING INSTRUCTIONS
Average ffuel
consumption
Ø l/100 k km
Indicates the average fuel consumption,
not the consumption at the moment.
After switching on the ignition or after
deleting the corresponding memory, the
average fuel consumption is displayed
after having driven approximately 300
meters. Until that moment, the screen will
display lines instead of the function. The
figure is updated every 5 seconds.
Multifunction IIndicator 1
1 – indicates
the average fuel consumption of the par-
tial trip.
Multifunction IIndicator 2
2 – indicates
the average fuel consumption of all of the
partial trips (see also "memory of total
route").
Note
The quantity of fuel which has been used
is not indicated.
Current c consumption
l/100 k km
Indicates the current consumption in
l/100 km.
The consumption is calculated in intervals
of 2 seconds. When the vehicle is
stopped, the consumption is indicated in
l/h.
6 – – S Selector llever p position d display*
The position of the automaticgearbox
selector lever is indicated in the display.
See "Automaticgearbox" chapter.
7 – – M Mileage cclock/ TTrip m mileage
The upper counter registers the total dis-
tance driven and the lower one the short
trips.
The last figure of the lower counter indi-
cates 100 m.
The trip mileage can be put back to zero
by pressing the reset knob next to the
speedometer (partial mileage clock).
All manuals and user guides at all-guides.com
all-guides.com