Seat toledo Page 222 Owner'S Manual Download

Page: 222 / 258

Number p

plate llight

•

Unscrew lens and lever it off with great

care to avoid breakage.

•

Pull defective bulb out of holder and

insert the new bulb.

•

Insert lens in the tailgate opening,

ensure that the rubber seal and the light
are correctly positioned (see adjacent
light).

•

Do not overtighten the lens screws.

Interior llights a

and ffront rreading

lights ((three p

parts)

•

Remove the lens. To do this insert a fine

screwdriver into the gap between the
housing and lens (arrow) and lever the
lens off carefully, to avoid damage.

•

Pull out the defective bulb and insert a

new one.

•

First attach lens to switch trim with both

retaining lugs. Then push up at front until
both locking plugs engage.

3.80

–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

IF AND WHEN

TIPS AND MAINTENANCE

B45-145C

TO8-048A

All manuals and user guides at all-guides.com

Summary of Contents for toledo



































































































































































































































































Search results

Summary of Contents for toledo

Reviews:

Related manuals for toledo

Brands by name

Popular brands

Seat toledo, Owner'S Manual

Search results

Summary of Contents for toledo

Reviews:

Related manuals for toledo

Brands by name

Popular brands