Seat toledo Owner'S Manual Download

Page: 220 / 258

Side iindicators

•

Press the indicator to the left or to the

right and remove the bulb.

•

Pull out bulb holder.

•

Pull out the defective glass bulb and

insert new one.

•

Slide bulb holder into the indicator

guides until the holder engages.

•

First place the indicator with retaining

lugs (arrow

) in body opening and then

engage the light in the direction of the
arrow (arrow

Door llights

•

Remove complete light carrier. To do

this, insert the flat blade of the screw-
driver between the light and the roof trim
(arrow) and carefully lever the light carrier
out until it is possible to pull it out to the
rear from the trim.

•

Pull out defective bulb and insert new

one.

•

Press the bulb carrier in at the front first

and then press the bulb opening in the
roof trim.

3.78

–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

IF AND WHEN

TIPS AND MAINTENANCE

B1J-084D

B11-080D

All manuals and user guides at all-guides.com

Summary of Contents for toledo



































































































































































































































































Search results

Summary of Contents for toledo

Reviews:

Related manuals for toledo

Brands by name

Popular brands

Seat toledo, Owner'S Manual

Search results

Summary of Contents for toledo

Reviews:

Related manuals for toledo

Brands by name

Popular brands