Seat toledo, Owner'S Manual

Page: 141 / 258

DRIVING –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
2.101
HANDLING INSTRUCTIONS
Altering s stored s speed
Reducing/setting
The stored speed can be reduced by
pressing button B.
By pressing button B briefly, the stored
speed is reduced by a preset amount. If
you press and hold the button, the speed
will decrease through automatic decelera-
tion. The speed reached when releasing
the button will be stored.
If the button is released at a speed of less
than approx. 30 km/h, the memory is
deleted. The speed must then, if neces-
sary, be reset using button B after the
vehicle has accelerated to a speed higher
than approx. 30 km/h.
Accelerating/storing
The stored speed can be increased with-
out depressing the accelerator by moving
the slide control A to RES.
By briefly pressing the slide control, the
speed is increased by a preset amount. If
the switch is moved to the left and held,
the speed is increased through automatic
acceleration. The speed reached when the
switch is released is then saved.
Switching s system o off
temporarily
Vehicles w with m manual g gearbox:
The system is temporarily s switched o off
when the brake or clutch pedals are used
or when the switch A is moved to OFF (not
engaged).
The speed stored at this time will remain
in the memory.
To resume the previously stored speed
push switch A fully to the left after the
brake or clutch pedals are released.
Warning
The p
programmed s speed m must o only
be rresumed w when iit iis n not ttoo h high
for e existing ttraffic c conditions.
All manuals and user guides at all-guides.com
all-guides.com