Seat Ateca 2020, Owner'S Manual

Page: 285 / 376

Help with parking and manoeuvring
function activates emergency braking when it
detects an obstacle in the vehicle’s path that
could cause a collision, driving forwards or in
reverse.
The function will not brake if the Parking Aid is
activated automatically. For the system to
operate, manoeuvring speed must be be-
tween 2.5-10 km/h (1.5-6 mph) for the front
area and between 1.5-10 km/h (1-6 mph) for
the rear.
Following an intervention, the braking while
manoeuvring function will be inactive in the
same direction of travel for 5 metres. Once
the gear is changed, or the selector lever’s
position is changed, the function will be ac-
tive again. The Parking Aid’s limitations apply.
The manoeuvre brake function (RBF) can be
set in the infotainment system using the func-
tion button

> SETTINGS > Parking and
manoeuvring
.
●

on
– permits the use of the braking while
manoeuvring function.
●

off
– does not permit the use of the
braking while manoeuvring function.
Temporary suppression of emergency
braking
●
When the function is deactivated with the
Braking while manoeuvring button that ap-
pears on the Parking aid screen of the Info-
tainment system.
● Whenever any of the car doors, rear lid or
bonnet are opened.
Rear parking aid*
Description
The rear parking aid is an optical and audi-
ble assistant that warns of obstacles located
behind the vehicle.
There are sensors integrated in the rear
bumper. When they detect an obstacle, you
are alerted by audible and visible warnings
on the Infotainment system.
If the Top View Camera* system is installed,
the rear parking aid will give an audible warn-
ing of objects in the vicinity of the rear of the
vehicle and the infotainment system’s screen
will display the image from the Top View
Camera*, which provides a real-time image
of objects located around the vehicle.
Make particularly sure that the sensors are
not covered by adhesives, residues, dirt and
the like, as this could affect the system's op-
eration. Cleaning instructions
›››
page 340 .
The approximate measurement range of the
rear sensors is:
●
Side area: 0.60 m
● Central area: 1.60 m
As you approach the obstacle, the frequency
of the audible signals will increase. The signal
will sound continuously at around 0.30 m:
Stop!
›››
in Introduction on page 278 ,
›››
in Introduction on page 279 !
If the separation is maintained, the warning
volume is reduced after about 4 seconds.
Parking Aid operation
Parking Aid connection
●
Select reverse gear.
Parking Aid disconnection
●
Place the selector level in position P , N or D
(for automatic gearboxes) or disengage re-
verse (for manual gearboxes).
Set the lever to the N or D position to maintain
the system active for approximately 8 sec-
onds before switching off. During that time,
Parking assist will switch off if:
●
The selector lever is moved to position P .
●
OR : the vehicle accelerates to approx.
15 km/h (9 mph) or faster.
If the Top View Camera* is installed, rear
parking aid will be automatically deactivated
when disengaging reverse gear.
»
283