Seat Ateca 2020, Owner'S Manual

Page: 240 / 376

Driving
lane boundaries (lines) to provide support for
the following functions:
●
Lane Assist
›››
page 253 .
●
Travel Assist
›››
page 255 .
●
Emergency assist
›››
page 257 .
CAUTION
To avoid affecting the operation of the sys-
tems, take the following points into consid-
eration:
● Clean the field of vision of the camera
regularly and make sure it is free of snow
and ice.
●
Do not cover the field of vision of the
camera.
●
Check that the windscreen is not dam-
aged in the area of the camera's field of vi-
sion.
Rear radar
Fig. 170
Rear view of the vehicle: radar sensor
zones.
Fig. 171
Sensor detection zones
The radar sensors are located on the left and
right of the bumper and are not visible from
the outside
›››
Fig. 170 . The sensors monitor
both the blind spot and traffic behind the ve-
hicle
›››
Fig. 171 .
They support the following functions:
● Lane departure warning (Side Assist)
›››
page 260 .
●
Rear cross traffic alert (RCTA)
›››
page 262 .
Automatic deactivation of supported func-
tions
The rear radar sensors deactivate automati-
cally when, among other reasons, one of the
sensors is detected to be permanently cov-
ered. This may be the case if, for example,
there is a layer of snow or ice over one of the
sensors.
The relevant text message will appear in the
dash panel display.
CAUTION
● The radar sensors on the rear bumper
may be damaged or shifted in the event of
a collision, for example, when entering or
exiting a parking space. This may result in
the system disconnecting itself, or at least
possibly having its functionality diminished.
●
In order to ensure that the radar sensors
work properly, keep the rear bumper free of
snow and ice and do not cover it.
●
The rear bumper should only be painted
with paint authorised by SEAT. The lane de-
parture warning's functions may be limited
or work incorrectly if other paints are used.
●
The visibility of radar sensors may be af-
fected due to leaves, snow, strong haze or
238