Seat Ateca 2020, Owner'S Manual

Page: 243 / 376

Driver assistance systems
WARNING
Use of GRA could cause accidents and se-
vere injuries if it is not possible to drive at a
constant speed maintaining the safety dis-
tance.
●
Do not use GRA in heavy traffic, if the dis-
tance from the vehicle in front is insuffi-
cient, on steep roads, with several bends or
in slippery circumstances or on flooded
roads.
●
Never use the CCS when driving off-road
or on unpaved roads.
● Adapt your speed and the distance to the
vehicles ahead in line with visibility, weath-
er, the condition of the road and the traffic
situation.
●
To avoid unexpected operation of the
cruise control system, turn it off every time
you finish using it.
●
It is dangerous to use a set speed which is
too high for other conditions.
● If driving down a steep gradient, the GRA
cannot maintain a constant speed. The
speed can increase. In this case, brake and
change down a gear.
Operating the cruise control
Fig. 174
On the turn signal lever: controls for
operating the GRA.
Connecting
● Move the control
›››
Fig. 174
1
to

.
If no speed has been programmed, the sys-
tem will not control it.
Activating the cruise control
●
Press button
›››
Fig. 174
2
in area

.
The current speed is stored and the cruise
control is activated.
Temporarily interrupting
●
Move the control
›››
Fig. 174
1
to

or
step on the brake.
The cruise control system is switched off tem-
porarily. The speed is stored.
Reinstating the cruise control
●
Press button
›››
Fig. 174
2
in area

.
Cruise control is activated at the stored
speed.
Adjusting the speed
While the GRA is set, the stored speed can be
adjusted with button
›››
Fig. 174
2
:
●
To increase in increments of 1 km/h (1 mph)
briefly press button
›››
Fig. 174
2
in the area

.
● To increase the speed without interruption,
keep button
›››
Fig. 174
2
pressed down in
the area

.
●
To reduce in increments of 1 km/h (1 mph)
briefly press button
›››
Fig. 174
2
in the area

.
●
To reduce the speed without interruption,
keep button
›››
Fig. 174
2
pressed down in
the area

.
The vehicle adapts the current speed by ac-
celerating or stopping accelerating. The vehi-
cle does not brake actively.
Switching off
●
Move control
›››
Fig. 174
1
to

.
The system is disconnected and the memo-
rised speed is deleted.
241