Seat Ateca 2020, Owner'S Manual

Page: 67 / 376

Fuses and bulbs
Tail light bulbs located in the body-
work
Fig. 59 Luggage compartment: access to the
bolt securing the tail light unit.
Fig. 60 Retaining tabs on reverse side of tail
light.
–
Check which of the bulbs is defective.
–
Open the rear lid.
–
Remove the lid, levering it with the flat side
of a screwdriver into the recess
›››
Fig. 59
1
.
–
Remove the bulb connector.
–
Unscrew the light securing bolt by hand or
using a screwdriver
›››
Fig. 59
2
.
–
Remove the light from the body, gently pull-
ing it toward you, and place on a clean,
smooth surface.
–
Disassemble the bulb holder unlocking the
securing tabs
›››
Fig. 60
1
.
–
Change the damaged bulb.
–
To refit follow the steps in reverse order, tak-
ing special care when fitting the bulb hold-
er. The securing tabs must click into place.
CAUTION
Take care when removing the rear light unit
to make sure there is no damage to the
paintwork or any of its components.
Note
●
Make sure you have a soft cloth ready to
place under the glass on the rear light unit,
to avoid any scratches.
●
In the case of LED lights, change only the
turn signal bulb.
Tail lights bulbs located in the rear
lid
Fig. 61
Rear lid open: remove the cover.
Fig. 62 Remove the bulb holder.
The rear lid must be open to change the
bulbs.
–
Remove the rear lid cover in the direction
indicated
›››
Fig. 61 .
»
65