Seat Ateca 2020, Owner'S Manual

Page: 78 / 376

Operation
Service Menu
3
Applies to vehicles with Active Info Display
(Digital SEAT Cockpit)
In the Service menu various settings can be
adjusted depending on the features.
Open the Service menu
To open up the
Service
menu, select the
Range
information profile while in the
Driv-
ing data
menu, and keep the

key press-
ed on the multifunction steering wheel for ap-
proximately 4 seconds. When it is released,
the
Service
menu will be displayed. Now
you can browse through the menu using the
keys on the multifunction steering wheel as
usual.
Restart the service interval display
Select the
Service
menu and follow the in-
structions on the screen of the instrument
panel.
Restart the oil service
Select the
Restore Oil service
menu and
follow the instructions on the instrument pan-
el display.
Restart journey data
Select the
Reset trip
menu and follow the
instructions on the instrument panel display
to reset the value.
Identifying letters on engine (LDM)
Select the menu
Engine code
. The identify-
ing letters of the engine will be shown on the
instrument cluster display at the bottom left.
Setting the clock
Select the
Time
menu and set the correct
time by turning the right thumbwheel of the
multifunction steering wheel.
Driving data indicator (multifunc-
tion display)
The display of the travel data (multifunction
display) shows different values about the
journey and the consumption.
Change from one display to another
Vehicles without multifunction steering wheel:
●
Press the rocker switch

on the wiper lev-
er
›››
page 87 .
Vehicles with multifunction steering wheel:
●
Turn the right thumbwheel of the multifunc-
tion steering wheel
›››
page 86 .
Changing memory
Vehicles with analogue instrument panel:
●
Press the

button on the windscreen
wiper lever or the

button of the multifunc-
tion steering wheel.
Vehicles with digital instrument panel:
●
While in
Travel data > General infor-
mation
press

on the multi-function steer-
ing wheel to switch between the 3 memo-
ries
1) :
Since start:
The memory is deleted if
the journey is interrupted for more than 2
hours.
Since refuelling:
Display and stor-
age of the journey data and the con-
sumption values collected. When refuel-
ling, the memory is deleted.
Long-term:
This memory contains trav-
el data up to a maximum of 19 hours and
59 minutes or 99 hours and 59 minutes,
or up to a maximum of 1999.9 km or
9999.9 km. When one of these values is
–
–
–
1) This will show all data on the display at the
same time: distance travelled, average con-
sumption, average speed and autonomy.
76