Seat Ateca 2020, Owner'S Manual

Page: 288 / 376

Driving
Determine the length of the trailer's draw-
bar
In order for the trailer manoeuvre assistant to
determine the length of the trailer’s drawbar,
drive the vehicle-trailer set through some
turning manoeuvres or curves. The more pre-
cisely the length of the drawbar is deter-
mined, the wider the angles that will be avail-
able when manoeuvring. The assistant subdi-
vides the maximum available end stops of the
angle indicator into four levels: approx. 30°,
45°, 60° and 75°.
Note
For technical reasons, the trailer manoeu-
vre assistant cannot always correctly de-
tect trailers with LED technology taillights.
Operating
Fig. 207 Rotary exterior mirror controls.: adjust
the trailer angle.
Fig. 208 Instrument panel display: engage re-
verse gear
Key of the Fig. 207 ,
›››
Fig. 208 :
Rotary exterior mirror controls.
Trailer orientation to the left
Trailer orientation to the right
Move the vehicle in the direction of the
towing device.
Actual trailer position
Target trailer position
Angle indicator zero position
Manoeuvre with the tow vehicle and trailer
set
The system requirements must be met
›››
page 285 .
●
Select reverse gear.
●
Press button

.
●
Release the steering wheel
›››
.
1
2
3
4
5
6
7
● Tilt the rotary control until the desired di-
rection is reached
›››
Fig. 207 . A representa-
tion of the tow vehicle and trailer set is shown
on the instrument cluster screen for guidance
purposes
›››
Fig. 208 .
●
Reverse by accelerating slowly. Pay atten-
tion to your surroundings!
●
If necessary, correct the angle with the ro-
tary control. Press the control towards the left
or right: the set will move to the left or right.
Press the control backwards: the vehicle will
follow the trailer.
●
Reverse and move forwards until the de-
sired position is reached.
●
The manoeuvre ends when a message is
displayed on the instrument cluster display
and, in some cases, an audio signal sounds.
Automatic brake operation
The trailer manoeuvre assistant helps the
driver by automatically operating the brakes
in certain situations.
The driver is responsible for braking in
time
›››
.
The brakes may be applied automatically
and the function deactivated in the following
situations:
●
A certain speed is exceeded.
● The steering wheel is grabbed. The vehicle
brakes automatically until it stops.
286