Seat Arona 2018 Owner'S Manual Download

Page: 181 / 372

Connectivity

Function button: function

FINISH

Once one or more settings have been
applied, click on this in the main menu
of the wizard to confirm and finalize

the settings.

If there are any parameters you have

not set, the next time you connect the
Infotainment system, the Initial Config-
uration Wizard will start up.

Only valid for Navi System.

Connectivity

Data transfer

This communication can allow data to be
read and/or written.

From the SETTINGS menu >

Data transfer

for SEAT apps

, there is a checkbox to acti-

vate/deactivate the function and a dropdown
menu called

Operation via apps

which

controls the level of interaction between the
apps and the system.

Full Link*

Full Link technology description

Fig. 180

Summary of Contents for Arona 2018





















































































































































































































































































































































































Search results

Summary of Contents for Arona 2018

Reviews:

Related manuals for Arona 2018

Brands by name

Popular brands

Seat Arona 2018, Owner'S Manual

Search results

Summary of Contents for Arona 2018

Reviews:

Related manuals for Arona 2018

Brands by name

Popular brands