Seat Arona 2018, Owner'S Manual

Page: 143 / 372

Lights and visibility
In vehicles that do not have the correspond-
ing menu, this function can be deactivated in
a specialised workshop.
WARNING
The main beam can dazzle other drivers.
Risk of accident! Never use the main beam
headlights or the headlight flasher if they
could dazzle other drivers.
Note
●
If the convenience turn signals are oper-
ating (three flashes) and the other conven-
ience turn signals are switched on, the ac-
tive part stops flashing and only flashes
once in the new part selected.
●
The turn signals only work when the igni-
tion is switched on. The corresponding
warning lamp
 
flashes in the instrument
panel. The control lamp

flashes when
the turn signals are operated, provided a
trailer is correctly attached and connected
to the vehicle. If a turn signal bulb is defec-
tive, the control lamp flashes at double
speed. If the trailer turn signal bulbs are
defective, the control lamp

does not
light up. Change the bulb.
●
The main beam headlights can only be
switched on if the dipped beam headlights
are already on. The warning lamp

then
comes on in the instrument panel.
●
The headlight flasher comes on for as
long as you pull the lever – even if no other
lights are switched on. The warning lamp

then comes on in the instrument panel.
● When the parking lights are switched on,
the headlight and the tail light on the cor-
responding side of the vehicle light up. The
parking lights will only work with the igni-
tion off. If said light is on, an audible warn-
ing will be emitted while the driver door is
open.
●
If the turn signal lever is left on after the
key has been taken out of the ignition lock,
an acoustic signal sounds when the driver
door is opened. This is intended as a re-
minder to switch off the turn signal, unless
you wish to leave the parking light on.
Coming Home/Leaving Home Func-
tion*
Fig. 143
Related video
The Leaving Home function is controlled with
a photosensor.
If the Coming Home or Leaving Home func-
tion is connected, the front side and dipped
lights, the tail lights and the number plate
light will light up to provide assistance.
Coming Home function
The Coming Home function is activated by
switching off the ignition. When the driver
door is opened, the Coming Home lighting
comes on.
The Coming Home lighting switches off in the
following cases:
●
If, 30 seconds after being connected, any
doors or the rear lid remain open.
●
If the light switch is turned to position

.
●
If the ignition is switched on.
Automatic Leaving Home function
The Leaving Home function is activated when
the vehicle is unlocked if:
●
the light control is in position

and
●
the photosensor detects “darkness”.
The Leaving Home lighting switches off in the
following cases:
●
If the time period for the delay in switching
off the headlights has ended
●
If the vehicle is locked again.
●
If the light switch is turned to position

.
●
If the ignition is switched on.
»
141