Seat Arona 2018 Owner'S Manual Download

Page: 20 / 372

The essentials

●

Open the door and pull the lever under the

dashboard

›››

Fig. 11

●

To lift the bonnet, press towards the left on

the lever located under the bonnet, in the
centre

›››

Fig. 12

. The arrester hooks are

released.

●

Release the bonnet stay and secure it in the

fixture designed for this in the bonnet.

Close the bonnet

●

Slightly lift the bonnet.

●

Release the bonnet stay and replace it in its

support.

●

At a height of approximately 30 cm let it fall

so it locks.

If the bonnet does not close, do not press
downwards. Open it again and let it fall as
mentioned above.



›››

in Safety notes for work in the

engine compartment on page 316



›››

page 315

Controls for the windows

Fig. 13

Detail of the driver door: controls for

the windows.

●

Open the window: press the button



●

Close the window: pull on the button



Buttons on the driver door

Window on the front left door
Window on the front right door
Window on the rear left door
Window on the rear right door
Safety switch for deactivating the electric
window buttons in the rear doors.



›››

in Opening and cl osing the

electric windows on page 137



›››

page 136

Before driving

Related video

Fig. 14

Vehicle interior

Summary of Contents for Arona 2018





















































































































































































































































































































































































Search results

Summary of Contents for Arona 2018

Reviews:

Related manuals for Arona 2018

Brands by name

Popular brands

Seat Arona 2018, Owner'S Manual

Search results

Summary of Contents for Arona 2018

Reviews:

Related manuals for Arona 2018

Brands by name

Popular brands