background image

Practical tips

AdBlue

®

 freezes at temperatures of -11°C

(+13°F). The system has heating elements
that guarantee its operation even at low tem-
peratures.

The AdBlue

®

 tank level capacity is approxi-

mately 10.4 litres.

The AdBlue

®

 tank should never be empty.

When the distance to empty drops below
2400 km, a warning to refill the AdBlue

®

 tank

will appear on the dash panel display

››› 

page 314

. If this information is ignored, lat-

er on it will not be possible to re-start the en-
gine. If this warning does not appear, it is not
necessary to refill the AdBlue

®

 tank.

AdBlue

®

 is a registered brand of the German

Association of the Automotive Industry (VDA)
and is also known as AUS32 or DEF (Diesel
Exhaust Fluid).

CAUTION

Filling the AdBlue

®

 tank excessively can

cause damage to the tank.

Refilling AdBlue

®

Fig. 280 

AdBlue tank cap.

Operations prior to refilling

Park the vehicle on a flat surface. If the vehi-
cle is not parked on a flat surface, but, for ex-
ample, on a slope or on the side of a curb, the
level indicator may not detect the load prop-
erly.

If a warning message about AdBlue

®

 levels

appears on the dash panel display, 

fill at

least the minimum amount required (ap-
prox. 5 litres)

 Only after adding this amount

will the system detect that AdBlue

®

 has been

added and you will be able to start the en-
gine again. The maximum amount that can
be refilled is 11 litres.

Switch the ignition off. If the ignition is not
switched off during refilling, the warning to re-
fill may continue to appear on the instrument
panel display.

Fill with a refill bottle
Only use AdBlue

®

 that complies with ISO

22241-1. Only use original containers.

Open the tank cover 

››› 

Fig. 280

.

Unscrew the tank cap by turning it in an an-

ti-clockwise direction.

Please observe the manufacturer's instruc-

tions, indicated on the refill bottle.

Check the expiry date.

Remove the cap of the refill bottle.

Insert the neck of the bottle in the tank filler

neck vertically and screw the bottle on by
hand, by turning it in a clockwise direction.

Press the refill bottle in the direction of the

filler neck and hold it in this position.

Wait until the contents of the refill bottle

have been poured into the AdBlue

®

 tank. Do

not compress or break the bottle!

Turn the bottle in a counter-clockwise di-

rection and gently pull it upwards 

››› 

.

The AdBlue

®

 tank is full when no more liquid

comes out of the bottle.

Screw on the tank cap in a clockwise direc-

tion until it is tightly closed.

Close the fuel tank flap.

Operations before driving

After refilling the tank, 

only

 switch on the ig-

nition.

314

Summary of Contents for Arona 2018





















































































































































































































































































































































































Reviews: