Seat Arona 2018, Owner'S Manual

Page: 263 / 372

Driver assistance systems
 
The ACC is not currently availa-
ble.
a)
With the vehicle stationary, switch off the engine and
start it up again. Check the radar sensor visually
›››
Fig. 236 (for dirt, ice or knocks). If it is still unavail-
able, refer to a specialised workshop to have the sys-
tem inspected.
a)
The symbol on the instrument panels with colour
display is in colour.
 The ACC is active.
No vehicle is detected in front. The programmed
speed remains constant.

If the symbol is white: the ACC is
active.
A vehicle in front has been detected. The ACC ad-
justs speed and distance from the vehicle in front.

If the symbol is grey: ACC is inac-
tive (Standby)
The system is switched on, but is not adjusting.

The lamp lights up green.
The ACC is active.
Some control and warning lamps will light up
briefly when the ignition is switched on to
check certain functions. They will switch off
after a few seconds.
WARNING
Observe the safety warnings
›››
in Warn-
ing symbols on page 118 .
Indications on the display
Fig. 235
On the instrument panel display: (A)
ACC inactive (Standby). (B) ACC active.
Instructions on the display
›››
Fig. 235 :
Vehicle ahead detected. ACC is not ac-
tive and is not regulating your speed.
1
Distance from the vehicle ahead. ACC is
not active and is not regulating your dis-
tance.
Vehicle ahead detected. ACC is active
and is regulating your speed.
Distance level 2 set by the driver.
ACC is active and is regulating your dis-
tance based on speed.
Note
When the ACC is connected, the indica-
tions on the instrument panel screen may
be concealed by warnings from other func-
tions, such as an incoming call.
Radar sensor
Fig. 236
On the front bumper: radar sensor.
»
2
3
4
5
261