Seat Arona 2018, Owner'S Manual

Page: 91 / 372

Self-help
Anchoring the front tow line
Fig. 97
Right side of the front bumper: remove
the lid.
Fig. 98
Right side of the front bumper: towline
anchorage screwed in.
The front towline anchorage is only mounted
if the vehicle has to be towed.
There is a cover with an opening into which
the towline anchorage is screwed on the right
part of the front bumper.
–
Take the towline anchorage from the on-
board tool set.
–
Remove the cover by pressing down on its
right-hand side until it is unclipped
›››
Fig. 97 .
–
Bolt the anchorage to its limit to the left , in
the direction of the arrow
›››
Fig. 98 .
After use, unscrew the towline anchorage and
fit the cover back on the bumper. Put the tow-
line anchorage back in the vehicle tool kit.
The towline anchorage should always be
kept in the vehicle.
Rear towline anchorage
Fig. 99
Right side of the rear bumper: cover-
cap.
Fig. 100
Right side of the rear bumper: towline
anchorage screwed in.
The rear towline anchorage should only be
mounted if you wish to tow another vehicle.
On the right of the rear bumper there is a
cover which covers a threaded hole.
–
Take the towline anchorage out of the vehi-
cle tool set
›››
page 84 .
–
Remove the cover by pressing down on its
right-hand side until it is unclipped
›››
Fig. 99 .
–
Screw the towline anchorage into the screw
connection as far as it will go
›››
Fig. 100
and tighten with the wheel brace.
After use, unscrew the towline anchorage and
put it back in the vehicle tool kit. Replace the
cover on the bumper. The towline anchorage
should always be kept in the vehicle.
»
89