SealMaster CRACK PRO 125 Owner'S Manual Download Page 37

Page: 37 / 74

CRACK PRO® HEATED HOSE MACHINE

OPERATING INSTRUCTIONS - DIESEL FUEL BURNER

POURING MATERIAL

18.

Set pour pot or applicator under the material discharge

valve #30 and raise the handle to open.

CAUTION: ALWAYS WEAR LONG SLEEVE SHIRT, GLOVES, AND
A FACE SHIELD WHEN PERFORMING THIS OPERATION!

19.

Fill the crack filler pour pot to the desired level and pour into

cracks. Follow with a V-shaped squeegee if desired.

20.

To stop for the day, perform the following steps:



Put the a/c power switch to the

off

position.



Turn the pump switch to reverse for 30 seconds, then
turn to the

off

position.



Leave the agitator switch on the forward position.



Turn the burner control switch to the

off

position.



Shut off the engine.

PUMP SWITCH

BURNER CONTROL

SWITCH

AGITATOR SWITCH

A/C POWER

SWITCH

Summary of Contents for CRACK PRO 125











































































Search results

Summary of Contents for CRACK PRO 125

Reviews:

Related manuals for CRACK PRO 125

Brands by name

Popular brands

SealMaster CRACK PRO 125, Owner'S Manual

Search results

Summary of Contents for CRACK PRO 125

Reviews:

Related manuals for CRACK PRO 125

Brands by name

Popular brands