SealMaster CRACK PRO 125, Owner'S Manual

Page: 20 / 74

20
CRACK PRO® HEATED HOSE MACHINE
MACHINE MAINTENANCE
TROUBLE SHOOTING GUIDE
PROBLEM
ENGINE
ISSUES
(HTO) HEATED TRANSFER OIL
COMING OUT OF VENT PIPE
(HTO) HEATED TRANSFER OIL
NOT CIRCULATING
CP-400 ONLY
HYDRAULIC SYSTEM
NOT WORKING
AGITATOR
DOES NOT ROTATE
POSSIBLE CAUSES/SOLUTIONS
OIL SPECIFICATIONS / REFER TO OWNER’S MANUAL
OPERATING INSTRUCTIONS / REFER TO OWNER’S MANUAL
DEAD BATTERY / REPLACE BATTERY
LOW ON FUEL / FILL FUEL TANK
PLUGGED FUEL LINE / CLEAN FUEL SYSTEM
PLUGGED FILTER / CHANGE FILTER
OVER HEATED HTO / CHECK TEMPERATURE CONTROL
MOISTURE IN HTO TANK / DRAIN AND REPLACE
HTO PAST OPERATING LIFE / DRAIN AND REPLACE
BROKEN DRIVE COUPLER / REPLACE COUPLER
Y-STRAINER PLUGGED / DRAIN AND REPLACE
HTO LINE VALVES CLOSED / OPEN VALVES
HTO LINE KINKED / REPLACE LINE
LOW ON HTO / CHECK LEVEL AND FILL
HTO PUMP WORN / REPLACE PUMP
DRIVE MOTOR WORN / REPLACE DRIVE MOTOR
LOW OIL LEVEL / CHECK LEVEL AND FILL
HYDRAULIC PUMP WORN / REPLACE PUMP
FILTER PLUGGED / REPLACE FILTER
TANK VALVE CLOSED / OPEN VALVE
KINKED HOSE / REPLACE HOSE
NO POWER AT 12V VDC COIL / CHECK WIRING & FUSE
BROKEN DRIVE COUPLER / REPLACE COUPLER
BROKEN DRIVE MOTOR / REPLACE MOTOR
NOT WORKING LID SWITCH / CHECK LID SWITCH
HYDRAULIC CARTRIDGE / REPAIR OR REPLACE