manualshive.com logo in svg

SealMaster CRACK PRO 125, Owner'S Manual

Share
Download
SealMaster CRACK PRO 125 Owner'S Manual Download Page 30

30 

 

 

CRACK PRO® HEATED HOSE MACHINE 

OPERATING INSTRUCTIONS - DIESEL FUEL BURNER 

STARTUP 

 

CHECK LIST 

1.

 

Check engine oil level. Follow manufacturers’ guidelines as to 
type and frequency of changes. 

2.

 

Check hydraulic oil level. Use grade AW68 hydraulic oil. 

3.

 

Check heat transfer oil level with oil dipstick #25. Use a good 
quality grade 68 turbine oil or heat transfer oil. 

The heat 

transfer oil level must always be checked when it is 

COLD

.

               

Never attempt to check it when the oil is hot, or severe injury 
could occur. 

NEVER CHECK WHEN HOT!

 

4.

 

Fill burner fuel tank with diesel.  

5.

 

Check heated hose. The heated hose is an electrical device. 
Extreme care must be taken in how it is used and treated. It 
must be inspected daily for damage to the outer cover. 

6.

 

Completely read and understand all owner’s manuals before 
trying to operate this machine. 

 

 

 

 

 

 

 

 

 

 

Summary of Contents for CRACK PRO 125











































































Reviews:

No comments

Brands by name

Popular brands

Load more brands