SD-EN-030 6 / 40 V1.0
3.3.
Sub-Tabs
–
Input (Encoder - TX):
This tab provides customised configurations for the selected encoders.
(Always click ‘Apply’ to apply modification
s to the device)
To use G265 transceivers as RTSP encoders for 3
rd
party decoders, the mainstream address is
rtsp://192.168.1.208/0
and substream address is
rtsp://192.168.1.208/1
.
Network setting:
Config the network parameters for the device, including name, IP address, subnet
mask, gateway, and MAC address.
Encoding setting:
Config settings for the mainstream and substream of the device.
Audio setting:
Config the audio setting for the encoder.
The default setting is ‘
3.5mm
’, corresponding to
the ports on the back of the device. U
ser can change it to ‘
HDMI
’ to use the HDMI port.
I/O setting:
User can set up the encoder to control third-party devices. This includes system control via
RS232, RS485, I/O, IR, TCP/IP, and Relay.
Led setting:
Config the device for the use of LED screen.
Advanced setting:
Config the functions of the selected G265 encoder.
•
Multi-cast: Config multi-cast steaming.
•
Loop out: Configure the signal from the loop-out device, such as brightness and sharpness.
