SD-EN-030 12 / 40 V1.0
4.3.
Designer Tool Menu
This menu contains basic functions to operate the designer.
Run test:
Enter the test mode to check the UI design of the software, such as page switching and button
binding.
Note that this mode runs offline and is only used to check the UI design, such as page switching and
button binding. Therefore functions that require the connection to the G265 transceiver, such as setting
up the output panel and PTZ IP camera control, cannot be tested under this mode.
Clear then New:
Clear the current UI design and create a new one.
Open:
Open an existing design.
Save as…:
Save the current design into a
‘
.txt
’
file.
Download:
Download the design from the connected G265 transceiver.
Upload:
Upload the current design to the connected G265 transceiver.
Hide:
Hide the Designer software.
Save then Exit:
Save the current design and exit the G265 Designer Software.
