SD-EN-030 7 / 40 V1.0
•
Master-slave: Change the master-slave mode. Ensure that
there is only one ‘
Master
’ in both
the encoders and decoders.
•
Crop: Crop the input signal to any size.
•
OSD: Add OSD onto the input signal.
•
System Info:
The information of the device. As ‘
Switch to output
’
function is no longer being
used, user needs to toggle the switch on the back of the G265 transceiver and restart it to
switch between encoder and decoder.
System query:
Display the system log of the selected device.
Firmware Update:
Update the firmware of the selected G265 transceiver. Note that this function is only
visible when the software is full screen.
